Tehnilised andmed
6-port 10/100Mbps PoE switch (5xPoE + 1xUplink), PoE over 4 pairs, built-in module with integrated 55 V 90 W power supply.
IPB-5-10A-OF is designed as a universal PoE network switch dedicated to IP CCTV systems.
By integrating the power supply directly into the switch, most of the installation only involves connecting UTP cables and 230 VAC mains power.
The high output power (90 W), high output voltage (55 VDC), and PoE over all four UTP pairs enable the device to power high-demand receivers, such as PTZ cameras or multiple PoE extenders from the xPoE or APT series.
Thanks to the high PoE port power of the IPB and the higher PoE voltage, it is possible to build extensive installations or add additional branches using APT/xPoE series extenders.
At the same time, the IPB-5-10A-OF is a convenient PoE source for 2WIRE and XCOAX converters. With good quality cables, it is possible to connect several IP cameras over single coaxial cable or twisted pair cable.
Key features and functions:
- quick and easy setup with no configuration required
- capable of powering 5 PoE receivers (802.3af/at or PASSIVE)
- up to 40 W of power per PoE port (total power budget of 90 W)
- high efficiency of the integrated power supply (>90%)
- PoE can be disabled on selected ports
- clear LED indication of power and data transmission status
- electronic fuse for each PoE channel (auto-reset)
- additional screw terminal block enabling the use of 55 VDC voltage
- easy system expansion and scaling by adding additional APT/xPoE switches and IP/IPUPS kits
Electronic PoE output protection ensures continuous operation of the entire system in the event of a short circuit or overload on a single PoE port, and automatic voltage restoration after the failure has been resolved.
IPB-5-10A-OF is a built-in module, while there are two switch models available with an external enclosure:
1. IPB-5-10A-S4 in a dedicated ABOX-S4 enclosure with IP55 protection rating and two rubber plugs.
2. IPB-5-10A-M2 in an ABOX-M2 outdoor enclosure with IP56 protection rating, the enclosure has 6 x M16 and 1 x M20 cable glands.
The IPB-5-10A-OF is designed to work with IP cameras and other network devices powered by the PoE 802.3af/at and PoE PASSIVE standards.
Examples of applications
Basic application of IPB-5-10A-OF.
Example configuration of IPB-5-10A-OF in combination with xPoE-4-11A-HS.
Example configuration of IPB-5-10A-OF in combination with xPoE-3-11A.
Example configuration of IPB-5-10A-OF in combination with xPoE-6-11-OF.
Example configuration of IPB-5-10A-OF with cascaded connection of xPoE-3-11A extenders.
Technical data
| Total number of ports: | 5 PoE ports, 1 UpLink port |
| PoE OUT: | LAN 1 ... LAN 5 PoE Passive |
| LAN 10/100Mbps ports: | LAN 1 ... LAN 6 |
| LAN + PoE OUT 10/100Mbps ports: | LAN 1 ... LAN 5 |
| Input Voltage: | 190 ... 260 VAC, 50 Hz |
| Output PoE Voltage: | 55V +/- 2% |
| Maximum output power from the port: | LAN 1 ... LAN 5 - PoE Passive 40 W |
| Output power control: | LAN 1 ... LAN 4 jumpers |
| Surge protection: | LAN 1 ... LAN 6 |
| Overload protection: | LAN 1 ... LAN 5 Short-circuit protection 0.75 A |
| Power: | 90 W |
| Power supply input protection: | 3.15 A slow-blow fuse |
| Power supply output protection: | Electronic overload protection at 3 A |
| Thermal protection of the power supply: | TSD 130 °C – requires power supply reset |
| Efficiency: | 93% @90 W |
| Mains voltage indication: | LED_AC (white) – mains voltage present |
| Power indication: | LED_PWR (white) – power present |
| PoE indication: | LED LAN 1 ... LAN 5 (red) - PoE present |
| Transmission indication: | LED LAN 1 ... LAN 6 (green) - link and data transmission |
| Temperature range: | -25°C...+50°C |
| Dimensions: | 95 x 131 x 28 mm |
| Weight: | 0,14 kg |
| Housing construction: | Built-in module |
| Assembly: | Snap-in spacer pins, 10.8 mm hole patterns |
| EAN code: | 5902143691303 |
| PKWiU code: | 26.30.23.0 |
| HS code: | 8517 62 |
| CN2020 code: | 8517 62 00 |